How to Overcome Leaks on House Walls
Our home is our palace. Naturally, we want to have a perfect and beautiful home, with all the neatness starting from the yard, terrace, to the interior. We want to see a house that is clean, neat, and cool to live in. But not infrequently the neatness and cleanliness that we have tried is disturbed by moist spots on the interior walls.
This leak is caused by water molecules seeping. This must be addressed immediately to stop the seepage from getting worse. But of course, overcoming seepage leak on the wall need attention. We must first identify the cause. To prevent it from the beginning, we need to look for building materials that have good quality. One of them is available at Sydney Roof and Building Supplies, they provide building materials at an affordable price.
Loss due to Leakage
Some homeowners sometimes ignore the seepage that appears when it rains. Wall leaks and seepage can cause various problems. The paint on the wall will break, and white molds will appear on the wall where the paint is falling.
Then how to deal with leakage on the wall of the house?
Water Seepage Due To Hair Cracks Walls
One characteristic of seepage is the appearance of cracks in the walls of your home.
Cracks occur due to the less plaster forming elements. In other words, when the plaster is stirred, it still contains soil and other material. Another cause is probably happened when you paint the wall, the plaster is still rather wet.
Water Seepage Originating From Gap within Neighboring Houses
If your house is close to a neighbor’s house, sometimes there are some problems, and one of them is the seepage of water that comes in from the gap in the wall that coincides with the neighbor.
One solution we can do is close the gap using plaster, then close again with a Leakproof Coating (Waterproofing).
Water Seepage Because The Outer Wall Has Not Been Plastered
Moist walls are most often found on walls that have not been plastered. These pores that have not been plastered make rainwater seep more quickly through the pores of wall material, penetrate the wall and form a watermark on the wall.
Seepage Due to Leaking Water Pipes
Usually, patches of moisture will occur continuously, especially when it rains, and are stored below about 1 meter on the wall of the house. Groundwater that absorbs into the interior wall enters through the capillary material of cement and generally occurs because of the low quality of plastering material, occurring on the outside or inside walls.
The solution we can do is to dredge plastering approximately 1 meter from the surface, then replace it with a new plaster. The ratio used between sand and cement is around 3: 1. After that, the painting can be done.
If a leak on the wall of this house occurs because of a leaking water pipe, the characteristic is can be seen from the bottom wall, about 1 meter from the floor. The spot generally looks worse than the usual spot.